Heatlock™
| Self Supporting Hull
| Service Access | Forever
Floor™ | Castcore®
Cover | Reflex Torsion
Hose | Tru-Guard™ Heater
| Full Metal Cabinets |
Digital Controls | Filtration
| Hyrdrotherapy Jets | Aromatherapy

Cleaning filters is one of those necessary evils of owning a spa that
Arctic Spas® has always felt should be eliminated. So... not only
have we found a way to rid you of this nuisance, we had a filter developed
for us that does a far better job at keeping your water clear.
As with the rest of the Arctic Pure™
maintenance system, the MicroPure™, water filtration system is
easy to use.
Step one is to pre-filter the water going
into the spa, because tap water is not really pure water. The Micro
Pure™ pre-filter attaches to your garden hose and the proprietary
ultra low micron filter media screens metals, suspended solids and even
bacteria from your water. Think of the many different types of drinking
water filters that are sold and you'll get the basic idea. By starting
with water that is already filtered clean you will find that you have
much fewer problems maintaining crystal clear water and that you'll
spend much less on maintenance products.
Step two is done for you! Your Arctic Spa
is already equipped with a Micro Pure™, Everyday Filter. This
filter is the equivalent to over 900 square feet of pleated paper or
cellulose (normal) filter media. It will screen particles down to 1
micron, and is 94% efficient at removing "stuff" from your
water in one pass. Compare this to the typical pleated filter systems
that screen down to only 60 microns, are only 50% efficient and quickly
clog and require frequent rinsing, degreasing, replacement, and in many
cases, multiple pricey filters. Throw away the chemical clarifiers,
de-scummers, cartridge cleaners and de-foamers .... the Micro Pure™
filtration system does not need them!
Best of all, when 4 months is up, simply
replace it with another inexpensive cartidge! That's it! Less maintenance
and fewer headaches makes sense and saves you money!